Lexmark X95 series - Sensor (Booklet Media Entrance) Late Jam

Diagnostic information 2-233
7558-xxx
Go Back
Previous
Next
491.03 Sensor (booklet media entrance) late jam
3
Check the sensor (booklet media
entrance) for proper connection.
Is the above component
properly connected?
Replace the sensor (booklet
media entrance).
Go to “Sensor (booklet media
entrance) removal” on
page 4-386.
Replace connections.
4
Check the booklet controller card
assembly for proper connection.
Is the above component
properly connected?
Replace the booklet controller
card assembly).
Go to “Booklet controller card
assembly removal” on
page 4-322.
If the error remains, then go to
step 5.
Replace connections.
5
Check the finisher controller
PCBA for proper connection.
Is the above component
properly connected?
Go to Step 6. Replace the connections.
6
POR the machine.
Does the error continue?
Replace the finisher controller
PCBA.
Go to “Finisher PCBA removal”
on page 4-353.
Problem resolved
Step Action and questions Yes No
1 Check the media path.
Is the media path free of any
media fragments?
Go to step 2. Remove any media or media
fragments.
2
Check the sensor (booklet media
entrance) for proper operation.
1. Enter the Diagnostics Menu.
2. Touch SENSOR TESTS.
3. Touch FINISHER SENSOR
TESTS.
4. Touch Sensor (booklet
media entrance).
Does the display on the
operator panel change every
time the sensing area of the
above sensor is interrupted or
blocked?
Go to Step 4. Go to Step 3.
3
Check the sensor (booklet media
entrance) for proper connection.
Is the above component
properly connected?
Replace the sensor (booklet
media entrance).
Go to “Sensor (booklet media
entrance) removal” on
page 4-386.
Replace connections.
Step Action and questions Yes No