Lexmark X95 series - Top Cover Removal

Repair information 4-421
7558-xxx
Go Back
Previous
Next
6. Disconnect the connector from the switch (finisher front door interlock) (C).
7. Release the hooks securing the switch (finisher front door interlock) (C) to the finisher.
8. Remove the switch (finisher front door interlock) (C).
Top cover removal
1. Open the finisher front door assembly.
2. Remove the rear upper cover. See “Rear upper cover removal” on page 4-380.
3. Remove the upper media bin assembly. See “Upper media bin assembly removal” on page 4-422.
B
A
C
Connector