Diagnostic aids 3-111
7558-xxx
Media transport
Media transport path
Media is supplied from tray 2, tray 3 or tray 4, and is transported to the printer along the media transport path.
The following is a cross section of the printer and the TTM, showing the main components directly associated
with the media path and transport.
Functions of main components
When the TTM is installed under the printer, additional trays are available.
Media tray assembly
It is necessary to adjust the rear side guides in the media tray assembly to match the media size.
Rear media guide
The rear media guide can be adjusted to different media sizes by moving it to the front or rear. The guide comes
into contact with the rear edge of the media and holds it in position.
TRAY 1TRAY 1
Duplex media transport roll assembly
MPF transport roll
MPF feed roll
MPF pick roll
MPF separation roll
Feed roll
Separation roll
Pick roll
Tray 1 transport roll assembly
Registration roll assembly
2nd transfer roll assembly
Fuser
Redrive roll
Tray module transport
roll assembly
Tray 4 transport roll assembly
Feed roll
Pick roll
Feed roll
Pick roll
Separation roll
Feed roll
Separation roll
Pick roll
TRAY 2TRAY 2
TRAY 3TRAY 3
TRAY 4TRAY 4
To Next Page
Loading...
