Lexmark X95 series - Error Codes and Messages; User Status and Attendance Messages

Diagnostic information 2-3
7558-xxx
Go Back
Previous
Next
Error codes and messages
User status and attendance messages
User primary message Explanation
Adjusting color Wait for the process to complete.
Change [paper source]
to [custom type name]
Try one or more of the following:
• Touch Use current [paper source] to ignore the message and print from the
selected tray.
• Load the correct paper size and type in the tray, verify the paper size and type
settings are specified in the printer control panel Paper menu, and then touch
Paper changed, continue.
• Touch Cancel job to cancel the print job.
Change [paper source]
to [custom type name]
load [orientation]
Try one or more of the following:
• Touch Use current [paper source] to ignore the message and print from the
selected tray.
• Load the correct paper size and type in the tray, verify the paper size and type
settings are specified in the printer control panel Paper menu, and then touch
Paper changed, continue.
• Touch Cancel job to cancel the print job.
Change [paper source]
to [custom string]
Try one or more of the following:
• Touch Use current [paper source] to ignore the message and print from the
selected tray.
• Load the correct paper size and type in the tray, verify the paper size and type
settings are specified in the printer control panel Paper menu, and then touch
Paper changed, continue.
• Touch Cancel job to cancel the print job.
Change [paper source]
to [custom string] load
[orientation]
Try one or more of the following:
• Touch Use current [paper source] to ignore the message and print from the
selected tray.
• Load the correct paper size and type in the tray, verify the paper size and type
settings are specified in the printer control panel Paper menu, and then touch
Paper changed, continue.
• Touch Cancel job to cancel the print job.
Change [paper source]
to [paper size]
Try one or more of the following:
• Touch Use current [paper source] to ignore the message and print from the
selected tray.
• Load the correct paper size and type in the tray, verify the paper size and type
settings are specified in the printer control panel Paper menu, and then touch
Paper changed, continue.
• Touch Cancel job to cancel the print job.
Change [paper source]
to [paper size] load
[orientation]
Try one or more of the following:
• Touch Use current [paper source] to ignore the message and print from the
selected tray.
• Load the correct paper size and type in the tray, verify the paper size and type
settings are specified in the printer control panel Paper menu, and then touch
Paper changed, continue.
• Touch Cancel job to cancel the print job.
Change [paper source]
to [paper size] [paper
type]
Try one or more of the following:
• Touch Use current [paper source] to ignore the message and print from the
selected tray.
• Load the correct paper size and type in the tray, verify the paper size and type
settings are specified in the printer control panel Paper menu, and then touch
Paper changed, continue.
• Touch Cancel job to cancel the print job.