Lexmark X95 series - Booklet Front Tamper Motor Removal

Repair information 4-327
7558-xxx
Go Back
Previous
Next
4. Remove the front tamper guide (A).
Booklet front tamper motor removal
1. Remove the booklet unit assembly. See “Booklet unit chassis removal” on page 4-335.
2. Remove the booklet unit assembly left cover. See “Booklet unit assembly left cover removal” on
page 4-334.
3. Disconnect the connector from the booklet front tamper motor.
4. Remove the two screws securing the booklet front tamper motor from the tamper frame assembly.
Right
B
A
Left