Lexmark X95 series - Sensor (HCF Docking Interlock) Removal

Repair information 4-451
7558-xxx
Go Back
Previous
Next
7. Remove the HCF tray lift gear bracket (D).
Note: Ensure that all gears rotate smoothly without binding. If necessary, loosen the three screws and adjust
the HCF tray lift gear bracket (D).
Sensor (HCF docking interlock) removal
1. Remove the HCF media tray.
2. Disconnect the connector from the sensor (HCF unit docking interlock) (A).
3. Release the hooks securing the sensor (HCF unit docking interlock) (A) to the unit.
A
B
C
D