Lexmark X95 series - Touch Screen (MFP) Removal

4-174 Service Manual
7558-xxx
Go Back
Previous
Next
3. Detach the toner smart chip PCB and remove.
Touch screen (MFP) removal
1. Remove the operator panel right cover. See “Operator panel right cover removal” on page 4-11.
2. Remove the operator panel left cover. See “Operator panel left cover removal” on page 4-10.
3. Remove the operator panel front cover. See “Operator panel front cover (MFP) removal” on page 4-8.
4. Remove the operator panel. See “Printer front door removal” on page 4-13.
5. Remove the operator panel PCBA. See “Operator panel PCBA (MFP) removal” on page 4-131
6. Remove the seven screws (A) securing the shield to the assembly.
7. Disconnect the cable (B).