Lexmark X95 series - Sensor (ADF Scan Width 3) Removal

4-258 Service Manual
7558-xxx
Go Back
Previous
Next
11. Release the hooks securing the sensor (ADF scan width 2) (C).
12. Remove sensor (ADF scan width 2).
Sensor (ADF scan width 3) removal
1. Open the ADF top door.
2. Remove the ADF front cover. See “ADF front cover removal” on page 4-213.
3. Remove the three screws (A) securing the grounding plate to the machine.
4. Remove the grounding plate.