Lexmark X95 series - Sensor (Tray 5 Media Out) Removal

4-454 Service Manual
7558-xxx
Go Back
Previous
Next
5. Remove the sensor (tray 5 media level) (A).
Sensor (tray 5 media out) removal
1. Open the HCF top door.
2. Open the HCF feed unit assembly.
3. Remove the connector from the sensor (tray 5 media out) (A).
4. Release the hooks securing the sensor (tray 5 media out) (A) to the HCF feed unit assembly (B).
A
B
Front
Connector