Lexmark X95 series - HCF Top Door Assembly Removal

Repair information 4-447
7558-xxx
Go Back
Previous
Next
3. Remove the HCF top cover (B).
HCF top door assembly removal
1. Remove the HCF unit from the printer.
2. Remove the HCF top cover. See “HCF top cover removal” on page 4-446.
3. Remove the HCF rear cover. See “HCF rear cover removal” on page 4-441.
4. Open the HCF top door assembly.
5. Remove the two screws securing the bracket (A) to the frame assembly (B).
B