Lexmark X95 series - ADF Front Cover Removal; ADF Left Hinge Removal

Repair information 4-213
7558-xxx
Go Back
Previous
Next
ADF front cover removal
1. Open the ADF top door.
2. Loosen the screw (A) securing the ADF front cover to the machine.
3. Lift the ADF to its uppermost position.
4. Loosen the three screws (B).
5. Remove the ADF front cover.
ADF left hinge removal
1. Remove the ADF main drive sub-assembly. See “ADF main drive sub assembly removal” on
page 4-215.
2. Remove the two screws (A) securing the ADF left hinge to the base.