Diagnostic aids 3-125
7558-xxx
Tray 2 media tray assembly
1TM media feed units
Media feed unit assembly
The media feed unit assembly is a mechanical unit supplying media from the media tray assembly to the printer.
The driving force from the media feed lift motor on the media feed unit assembly is transmitted to the three roller
assemblies to feed media.
When the pick roller picks up sheets of media and the remaining media decreases, the media level actuator of
the sensor (media level) lowers accordingly.
Media feed lift motor
The media feed lift motor is activated to feed media and to lift the bottom plate. While feeding media, it rotates
forward to drive the pick roller. When lifting the bottom plate, it rotates in reverse to drive the tray module gears
to turn the lift up shaft.
Rear media guide
Bottom plate
End guide
To Next Page
Loading...
