Lexmark X95 series - Sensor (Compiler Media Present) Static Jam

2-222 Service Manual
7558-xxx
Go Back
Previous
Next
484.01 Sensor (compiler media present) static jam
7
Check the stepper motor for
proper connection.
Is the above component
properly connected?
Replace the stepper motor.
Go to “Stepper motor (exit)
assembly and belt (exit)
removal” on page 4-417.
Replace the connection.
8
Check the buffer diverter gate
solenoid for proper operation.
When performing
motor tests, ensure
that all cover and
door interlock
switches are
overridden.
1. Enter the Diagnostics Menu.
2. Touch MOTOR TESTS.
3. Touch FINISHER MOTOR
TESTS.
4. Touch Buffer diverter gate
solenoid.
Does the above component
operate properly?
Go to step 10. Go to step 9.
9
Check the buffer diverter gate
solenoid for proper connection.
Is the above component
properly connected?
Replace the buffer diverter gate
solenoid.
Go to “Buffer diverter gate
solenoid removal” on
page 4-338.
Replace the connection.
10
Check the finisher controller
PCBA for proper connection.
Is the above component
properly connected?
Go to Step 11. Replace the connections.
11
POR the machine.
Does the error continue?
Replace the finisher controller
PCBA.
Go to “Finisher PCBA removal”
on page 4-353.
Problem resolved
Step Action and questions Yes No
1 Check the media path.
Is the media path free of any
media fragments?
Go to step 2. Remove any media or media
fragments.
Step Action and questions Yes No