Lexmark X95 series - Sensor (Upper Media bin Full) Removal

Repair information 4-405
7558-xxx
Go Back
Previous
Next
7. Release the hooks securing the sensor (stapler carriage HP) (A) to the stapler carriage assembly (B).
8. Remove the sensor (stapler carriage HP) (A).
Sensor (upper media bin full) removal
1. Open the finisher front door assembly.
2. Remove the screw securing the bracket (A) to the upper media bin vertical cover (B).
3. Move the bracket frontward and downward to gain access to the harness and connector.
4. Release the harness from the clamp.
A
B