Lexmark X95 series - 4 Xx Service Error Codes

Diagnostic information 2-31
7558-xxx
Go Back
Previous
Next
381.38
Service finisher error
Sensor (booklet knife HP) lag error The sensor (booklet knife HP) activated,
but did not clear within the specified time.
Go to “381.38 Sensor (booklet knife HP)
lag jam” on page 2-206.
381.39
Service finisher error
Booklet stapler error The booklet stapler unit is not completely
inserted into the booklet maker unit
assembly or it has failed.
Go to “381.39 Booklet Staple Fail” on
page 2-207.
381.40
Service finisher error
Sensor (booklet compiler media
present) error
The sensing area of the sensor (booklet
compiler no media) did not detect any
media when the booklet stapler motor was
activated.
Go to “381.40 Sensor (booklet compiler
media present) error” on page 2-208.
381.41
Service finisher error
Communication error with booklet
controller card assembly
A communication error has occurred with
the booklet controller card assembly and
the finisher controller card assembly.
Go to “381.41 Communication error with
booklet controller card assembly” on
page 2-209.
4xx service error codes
Error code Description Action
401.01
Service finisher error
Sensor (finisher media entrance) static
jam.
Media remains detected by the sensor
(finisher media entrance).
Go to “401.01 Sensor (finisher media
entrance) static jam” on page 2-210.
401.03
Service finisher error
Sensor (bridge media entrance) late
jam
The media is late reaching the sensor
(bridge unit media entrance) within the
specified time.
Go to “401.03 Sensor (bridge media
entrance) late jam” on page 2-210.
401.05
Service finisher error
Sensor (bridge media entrance) lag
jam
The sensor (bridge media entrance)
activated, but did not clear within the
specified time.
402.01
Service finisher error
Sensor (bridge media exit) static jam Media remains detected by the sensor
(bridge media exit).
Go to “402.01 Sensor (bridge media
exit) static jam” on page 2-213.
402.03
Service finisher error
Sensor (bridge media exit) late jam The media is late reaching the sensor
(bridge media exit) within the specified
time.
Go to “402.03 Sensor (bridge media
exit) late jam” on page 2-214.
3xx service error codes
Error code Description Action