Lexmark X95 series - Operator Panel Speaker (MFP) Removal

4-132 Service Manual
7558-xxx
Go Back
Previous
Next
6. Disconnect the three cables (B).
7. Remove the operator panel PCBA.
Operator panel speaker (MFP) removal
1. Remove the operator panel right cover. See “Operator panel right cover removal” on page 4-11.
2. Remove the operator panel left cover. See “Operator panel left cover removal” on page 4-10.
3. Remove the operator panel front cover. See “Operator panel front cover (MFP) removal” on page 4-8.
4. Remove the operator panel. See “Operator panel top cover (MFP) removal” on page 4-11.