Lexmark X95 series - Sensor (Decurler Cover Interlock) Removal

Repair information 4-319
7558-xxx
Go Back
Previous
Next
5. Release the hooks (B) securing the sensor (decurler cam HP) to the machine.
6. Remove the sensor (decurler cam HP).
7. Disconnect the cable (C).
Sensor (decurler cover interlock) removal
1. Remove the bridge unit assembly. See “Bridge unit assembly removal” on page 4-305.
2. Remove the bridge decurler top cover. See “Bridge decurler top cover removal” on page 4-302.