Repair information 4-77
7558-xxx
8. Release the two hooks (F) securing the developer HVPS PCBA to the machine.
9. Remove the developer HVPS PCBA.
Feeder slide guide removal
1. Remove the appropriate feeder unit. See “Printer tray 1 feeder removal” on page 4-144, “Tray module
media feeder removal” on page 4-281, “TTM tray 4 media feeder removal” on page 4-294, or “TTM
tray 3 feeder removal” on page 4-290.
2. Slide the plastic rail to detach the two tabs (A) securing the feeder slide guide to the assembly.
3. Detach the harness from the clamp (B).
4. Remove the feeder slide guide.
To Next Page
Loading...
