Lexmark X95 series - Page 80

2-30 Service Manual
7558-xxx
Go Back
Previous
Next
381.28
Service finisher error
Sensor (decurler cam HP) late error The sensor (decurler cam HP) didn’t
activate within the specified time.
Go to “381.26 Sensor (decurler cam HP)
late jam” on page 2-192.
381.29
Service finisher error
Sensor (decurler cam HP) lag error The sensor (decurler cam HP) activated,
but did not clear within the specified time.
Go to “381.27 Sensor (decurler cam HP)
lag jam” on page 2-193.
381.30
Service finisher error
Sensor (booklet front tamper HP) late
error
The sensor (booklet front tamper HP)
didn’t activate within the specified time.
Go to “381.30 Sensor (booklet front
tamper HP) late jam” on page 2-194.
381.31
Service finisher error
Sensor (booklet front tamper HP) lag
error
The sensor (booklet front tamper HP)
activated, but did not clear within the
specified time.
Go to “381.31 Sensor (booklet front
tamper HP) lag jam” on page 2-196.
381.32
Service finisher error
Sensor (booklet end guide HP) lag
error
The sensor (booklet end guide HP)
activated, but did not clear within the
specified time.
Go to “381.32 Sensor (booklet end
guide HP) lag jam” on page 2-197.
381.33
Service finisher error
Sensor (booklet rear tamper HP) late
error
The sensor (booklet rear tamper HP) didn’t
activate within the specified time.
Go to “381.33 Sensor (booklet rear
tamper HP) late jam” on page 2-199.
381.34
Service finisher error
Sensor (booklet rear tamper HP) lag
error
The sensor (booklet rear tamper HP)
activated, but did not clear within the
specified time.
Go to “381.34 Sensor (booklet rear
tamper HP) lag jam” on page 2-200.
381.35
Service finisher error
Sensor (booklet knife folding) failure The sensor (booklet knife folding)
activated, but did not clear within the
specified time.
Go to “381.35 Sensor (booklet knife
folding) failure” on page 2-202.
381.36
Service finisher error
Booklet unit failure The booklet unit is detected as open after
power on.
Go to “381.36 Booklet unit fail” on
page 2-203.
381.37
Service finisher error
Sensor (booklet knife HP) late error The sensor (booklet knife HP) activated,
but did not clear within the specified time.
Go to “381.37 Sensor (booklet knife HP)
late jam” on page 2-204.
3xx service error codes
Error code Description Action