Lexmark X95 series - Page 79

Diagnostic information 2-29
7558-xxx
Go Back
Previous
Next
381.16
Service finisher error
Sensor (punch cam HP) late error The sensing area of the sensor (punch
cam HP) is not interrupted during the
specified time after the punch unit starts
moving to the home position.
Go to “381.16 Sensor (punch cam HP)
late jam” on page 2-188.
381.17
Service finisher error
Sensor (punch cam HP) lag error The sensor (punch cam HP) activated, but
did not clear within the specified time.
Go to “381.17 Sensor (punch cam HP)
lag jam” on page 2-189.
381.18
Service finisher error
Sensor (punch carriage shift HP) late
error
The sensor (punch carriage shift HP) didn’t
activate within the specified time.
Go to “381.18 Sensor (punch carriage
shift HP) late jam” on page 2-190.
381.19
Service finisher error
Sensor (punch carriage shift HP) lag
error
The sensor (punch carriage shift HP)
activated, but did not clear within the
specified time.
Go to “381.19 Sensor (punch carriage
shift HP) lag jam” on page 2-191.
381.20
Service finisher error
Sensor (punch cam HP) late error The sensing area of the sensor (punch
cam HP) is not interrupted during the
specified time after the punch unit starts
moving to the home position.
Go to “381.16 Sensor (punch cam HP)
late jam” on page 2-188.
381.21
Service finisher error
Sensor (punch cam HP) lag error The sensor (punch cam HP) activated, but
did not clear within the specified time.
Go to “381.17 Sensor (punch cam HP)
lag jam” on page 2-189.
381.22
Service finisher error
Sensor (punch carriage shift HP) late
error
The sensor (punch carriage shift HP) didn’t
activate within the specified time.
Go to “381.18 Sensor (punch carriage
shift HP) late jam” on page 2-190.
381.23
Service finisher error
Sensor (punch cam HP) lag error The sensor (punch cam HP) activated, but
did not clear within the specified time.
Go to “381.17 Sensor (punch cam HP)
lag jam” on page 2-189.
381.26
Service finisher error
Sensor (decurler cam HP) late error The sensor (decurler cam HP) didn’t
activate within the specified time.
Go to “381.26 Sensor (decurler cam HP)
late jam” on page 2-192.
381.27
Service finisher error
Sensor (decurler cam HP) lag error The sensor (decurler cam HP) activated,
but did not clear within the specified time.
Go to “381.27 Sensor (decurler cam HP)
lag jam” on page 2-193.
3xx service error codes
Error code Description Action