Lexmark X95 series - Page 926

4-448 Service Manual
7558-xxx
Go Back
Previous
Next
6. Remove the bracket (A).
Note: When removing the bracket (A), leave the shaft (C) and the HCF top door spring R (D) attached to
the top door assembly.
7. Lift the HCF top door (E) and remove the shaft (C) from the hole in the frame assembly (B).
8. Remove the HCF top door spring L (F) from the slot in the frame assembly (B).
9. Remove the HCF top door assembly.
10. Remove the shaft (C).
11. Remove the top door spring R (D).
12. Remove the top door spring L (F).
D
E
A
E
C
F
Slot
D-shaped hole
B
F
Rear view
A
D-shaft