2-22 Service Manual
7558-xxx
202.03
Paper jam
Sensor (fuser exit) late jam The media is late reaching the sensor
(fuser exit) within the specified time after
reaching the sensor (registration).
Go to “202.03 Exit Sensor 1 Late Jam”
on page 2-102.
202.04
Paper jam
Sensor (fuser exit) lag jam The media reached the sensor (fuser exit)
but did not clear it within the specified time.
Go to “202.04/202.05 Sensor (fuser exit)
lag jam” on page 2-105.
202.05
Paper jam
Sensor (fuser exit) cleared too soon
jam
The media reached the sensor (fuser exit)
but cleared too soon.
Go to “202.04/202.05 Sensor (fuser exit)
lag jam” on page 2-105.
203.01
Paper jam
Sensor (upper redrive) static jam Media remains detected by the sensor
(upper redrive) after power on.
Go to “203.01 Sensor (upper redrive)
static jam” on page 2-107.
203.03
Paper jam
Sensor (upper redrive) late jam The media is late reaching the sensor
(upper redrive) within the specified time
after reaching the sensor (fuser exit).
Go to “203.03 Sensor (upper redrive)
late jam” on page 2-107.
203.05
Paper jam
Sensor (upper redrive) lag jam The media reached the sensor (upper
redrive) but did not clear it within the
specified time.
Go to “203.05 Sensor (upper redrive) lag
jam” on page 2-109.
230.01
Paper jam
Sensor (duplex wait) static jam. Media remains detected by the sensor
(duplex wait) after power on.
Go to “230.01 Sensor (duplex wait)
static jam” on page 2-111.
231.03
Paper jam
Sensor (duplex wait) late jam The media is late reaching the sensor
(duplex wait) within the specified time after
the upper redrive motor has turned on for
duplexing.
Go to “231.03 Sensor (duplex wait) late
jam” on page 2-111.
232.03
Paper jam
Sensor (registration) late jam (Duplex
direct)
The media is late reaching the sensor
(registration) within the specified time after
the registration clutch has turned on for
duplex direct mode.
Go to “232.03 Sensor (registration) late
jam (duplex direct)” on page 2-114.
242.01
Paper jam
Sensor (tray 2 feed out) static jam Media remains detected by the sensor
(tray 2 feed out) after power on.
Go to “242.01 Sensor (tray 2 feed out)
static jam” on page 2-115.
2xx service error codes
Error code Description Action
To Next Page
Loading...
