EasyManua.ls Logo

Lexmark X95 series - Page 74

Lexmark X95 series
1164 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
2-24 Service Manual
7558-xxx
Go Back
Previous
Next
245.01
Paper jam
Sensor (tray 5 feed out) static jam Media remains detected by the sensor
(tray 5 feed out) after power on.
Go to “245.01 Sensor (tray 5 feed out)
static jam” on page 2-127.
245.03
Paper jam
Sensor (tray 5 feed out) late jam The media is late reaching the sensor (tray
5 feed out) within the specified time.
Go to “245.03 Sensor (tray 5 feed out)
late jam” on page 2-128.
245.06
Paper jam
Sensor (tray 5 feed out) lag jam The media reached the sensor (tray 5 feed
out) but did not clear it within the specified
time.
Go to “245.06 Sensor (tray 5 feed out)
lag jam” on page 2-129.
245.56
Paper jam
Sensor (tray 5 feed out) late jam
80K interval for feed rollers exceeded
in tray 5.
The media is late reaching the sensor (tray
5 feed out) within the specified time.
Go to “245.56 Sensor (tray 5 feed out)
late jam (80K interval exceeded for feed
rollers)” on page 2-130.
250.05
Paper jam
Sensor (MPF feed out) lag jam The media reached the sensor (MPF feed
out) but did not clear it within the specified
time.
Go to “250.05 Sensor (MPF feed out) lag
jam” on page 2-132.
250.06
Paper jam
Sensor (MPF feed out) failed to pick
jam
The media is late reaching the sensor
(MPF feed out) within the specified time
after the feed from the MPF has started.
Go to “250.06 Sensor (MPF feed out)
late jam” on page 2-135.
250.56
Paper jam
Sensor (MPF feed out) late jam
80K interval for feed rollers exceeded
in tray 3.
The media is late reaching the sensor
(MPF feed out) within the specified time
after the feed from tray 4 has started.
Go to “250.56 Sensor (MPF feed out)
late jam (80K interval exceeded for feed
rolls)” on page 2-136.
281.03
Scanner jam
Sensor (ADF feed out) late jam The media is late reaching the sensor
(ADF feed out) within the specified time.
Go to “281.03 Sensor (ADF feed out)
late jam” on page 2-138.
282.01
Scanner jam
Sensor (ADF pre-registration) static
jam
Media remains detected by the sensor
(ADF pre-registration) after power on.
Go to “282.01 Sensor (ADF pre
registration) static jam” on page 2-139.
282.03
Scanner jam
Sensor (ADF pre-registration) late jam
(side 1)
The media is late reaching the sensor
(ADF pre registration) within the specified
time after pre-feed started.
Go to “282.03 Sensor (ADF pre
registration) late jam” on page 2-139.
2xx service error codes
Error code Description Action

Table of Contents

Related product manuals