MacDon M1240 - Page 501

215916 481 Revision A
Chapter 6: Options and Attachments
Several optional kits and attachments are available for your windrower, depending on your specific performance needs.
6.1 Cab
Several cab amenities are available which can make using the windrower more convenient for the Operator.
6.1.1 Automated Steering Systems
A MacDon-approved automated steering system is available from any MacDon Dealer which provides Trimble
®
global
positioning system (GPS) installation and support services.
MacDon windrowers are partially pre-wired for either the Trimble
®
AutoPilot
™
hydraulically integrated steering system or
the Trimble
®
EZ-Pilot
®
wheel/column-based assisted steering system. The windrower’ s ground speed lever (GSL) has an
automated steering (autosteer) engage switch.
The Trimble
®
EZ-Pilot
®
system for model year 2019 and later machines requires the MacDon EZ-Pilot
®
Ready kit
(MD #B6602). Installation instructions (MD #214623) are included in the bundle.
The Trimble
®
AutoPilot
™
system for model year 2019 and later machines requires the MacDon Trimble
®
Autopilot
™
Ready
kit (MD #B6601). Installation instruction (MD #214624) is included in the bundle.
Other GPS providers may supply parts in their vehicle-specific installation packages or make installation kits available
through MacDon Dealers.
6.1.2 Windrower Lighting Upgrade – Eight LED Work Lights, Standard on Deluxe Cab
Package
The standard windrower cab has four halogen field lights on the front, as well as two halogen stubble lights and two
halogen work lights on the back. The Windrower Lighting Upgrade kit (MD #B6889) contains eight LED work lights to
replace all of these lights. Machines with the deluxe cab package already have 360° Night Vision LED Lighting installed.
MD #B6889
Installation instructions are included in the bundle.
NOTE:
This lighting upgrade is included in the deluxe cab package.