215916 48 Revision A
3.5 Seat Belts
The windrower is equipped with seat belts on the operator’s seat and the training seat.
WARNING
Seat belts can help ensure your safety when they are properly used and maintained.
• Before starting the engine, fasten your seat belt, and ensure that the training seat occupant’s seat belt is securely
fastened.
• Never wear a seat belt loosely or leave any slack in the belt system. Never wear the belt in a twisted condition or
pinched between the seat structural members.
To fasten the seat belt:
Figure 3.17: Seat Belt
1. Pull the belt with metal eye (A), at the right side of seat,
completely across your body.
2. Push metal eye (A) into buckle (B) until it locks.
3. Adjust the position of the belt as low on your body
as possible.
OPERATOR’S STATION
To Next Page
Loading...
