NEC NEAX 7400 IMX User Manual

ND-70348 (E) CHAPTER 4
Page 204
Revision 3.0
ASYDL
Note 1: This data is assigned when suspending the SMDR output concerning the station-to-station calls made in
the self node. If “1” is set, the system ignores the intra-self node calls, and outputs only the billing infor-
mation on the node-to-node station calls.
Note 2: Available for software Release 2 or later, when SYS1, INDEX 512 is assigned.
SYSTEM
DATA
TYPE
(SYS)
SYSTEM
DATA
INDEX
(INDEX)
512-1535
DATA
(DATA)
00 – FF
(Hex)
BIT
CORRESPONDING
DATA
SYSTEM DATA CONTENTS
DATA
0/1
BIT
1
528
Not used
529
b
0
Parity Check Method for SMDR/MCI with LAN interface
b
1
0
b
2
~ b
7
Not used
530~531
Not used
532
FPC (Fusion Point Code) of the Center Node (CN) for the Cen-
tralized Maintenance
533
Not used
534
b
0
~ b
6
Not used
b
7
0 = NDM Data en bloc broadcasting (from NCN to all LNs)
1 = NDM Data individual broadcasting (from NCN to the LN)
535~575
Not used
576
b
0
Centralized Billing via Netfusing (Polling Method)
0/1 = Not/To be provided
b
1
Self-node Intra-station Call SMDR Output
0/1 = -/Stop Note 1, Note 2
b
2
SMDR Output
0/1 = Via IOC/LAN
b
3
Output the System Message related to connection down when
the system changeover occurs on LAN Interface for SMDR.
0/1 = Invalid/Valid
Note: Valid for software Release 9 or later.
0
b
4
~ b
7
Not used
577
b
0
FPC (Fusion Point Code) of the Center node (CN) for the Cen-
tralized SMDR (Centralized Billing via Netfusing).
FPC: 1-253 (01 Hex-FD Hex.)
Note: Data 01 Hex.-FD Hex. should be assigned at the Local
Node (LN) for the Centralized Billing via Netfusing.
Data“00” must be fixedly assigned at the Center Node
(CN) of Centralized Billing via Netfusing.
b
1
b
2
b
3
b
4
b
5
b
6
b
7
b
0
0
1
0
b
1
0
0
1
= Non Parity Check
= Odd Parity Check
= Even Parity Check

NEC NEAX 7400 IMX Specifications

General

Brand	NEC
Model	NEAX 7400 IMX
Category	Server
Language	English