NEC NEAX 7400 IMX - Page 441

ND-70348 (E) CHAPTER 4
Page 434
Revision 3.0
ALRNN
15 LSG
Line Signal
0 = Loop
1 = Ground Start C.O. Line
2 = CDH
3 = Caller ID (Loop)
4 = Loop
5 = E&M Tie Line
6 = DX
7 = 24V4
8 = Loop DID 9 - 11 = Not used
12 = Speech Line (for CCIS No. 7 or Bch of ISDN)
13 = Signal Line (for CCIS No. 7 or Dch of ISDN)
14 = Not used 15 = Not used
16 SMDR2 Detailed Billing Information
See Figure 4-17 (Next
Page) and Table 4-24
(page 436) .
17 H/M
Hotel Service in CCIS No. 7
0 = Out of Service 1 = In Service
18MC 00000Always assign data “0.”
19 ANI
E911 - ANI Service
0 = Out of Service 1 = In Service
20D 00000Always assign data “0.”
21MSB 00000Always assign data “0.”
22MSW 00000Always assign data “0.”
23 TR
0=–
1 = ICPT transfer by group-II signals used.
For MFC signaling.
LOGICAL ROUTE (LGRT) 1-899
REMARKSFUSION POINT CODE (FPC) 1-253
ROUTE NUMBER (RT) 1-255