EasyManuals Logo

NEC NEAX 7400 IMX User Manual

NEC NEAX 7400 IMX
857 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #513 background imageLoading...
Page #513 background image
ND-70348 (E) CHAPTER 4
Page 499
Revision 3.0
ARTI
4. Data Sheet
CDN
ROUTE NUMBER
TRUNK DATA
1 RST Assignment of Restart
0 = Restart Send per Individual Channel
1 = Not used 2 = Not used
3 = Restart not Send
2 HMT When assigning this data, zero (0) should al-
ways be entered.
0000
3 TRCRST Call Restriction by Information transfer rate in
Bearer Capability Information Element
0 = No restriction
1 = Data call restriction (Unrestricted digital,
Restricted digital and Video data calls are
restricted.)
2 = Speech call restriction (Speech, 3.1 kHz
audio and 7 kHz audio calls are restricted.)
3-15 = Not used
4 TRSRST Call Restriction by Information transfer rate in
Bearer Capability Information Element
0 = No restriction
1 = 384 Kbps (H0) call is restricted
2 = 1536 Kbps (H11)/1920 Kbps (H12) call is
restricted.
3 = 384 Kbps and 1536 (H11)/1920 Kbps
(H12) calls are restricted.
4-15 = Not used
5 T309LNK Assignment of Timer T309 for Data Link Fail-
ure
0 = Layer 2 Alarm with T309 for Data Link
Failure
1 = Layer 2 Alarm [Temporary] with T309 is
enabled
2 = Layer 2 Alarm [Permanent] with T309 is
enabled
3 = Not used
6 T309CON Assignment of Timer T309 for Layer 1 Failure
0 = Layer 1 Alarm with T309 is disabled
1 = Layer 1 Alarm [Temporary] with T309 is
enabled
2 = Layer 1 Alarm [Permanent] with T309 is
enabled
3 = Not used

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the NEC NEAX 7400 IMX and is the answer not in the manual?

NEC NEAX 7400 IMX Specifications

General IconGeneral
BrandNEC
ModelNEAX 7400 IMX
CategoryServer
LanguageEnglish

Related product manuals