Table 15: Drive Enclosure rail kits
Type of Drive
Enclosure
Contents
DE2-24P Drive
Enclosure
2 Phillips Number 2 pan head screws with patch lock
2 Phillips hex ange head screws (11mm)
1 Left-hand rail assembly
1 Right-hand rail assembly
4 Phillips Number 2
ACR hex ange screws
1 10mm wrench
8 Threaded rack adaptor pegs
1 Threaded rack adaptor kit label
4 Phillips hex ange screws (13mm)
DE2-24C Drive
Enclosure
2 Phillips Number 2 pan head screws with patch lock (M5 x 16)
1 Left-hand rail assembly
2 Phillips hex ange head screws (11mm)
1 Right-hand rail assembly
2 Cage nuts
4 Orange service screw labels
2 Clip nuts
8 Special screws for round hole rack
1 Rail kit user label
2 Phillips Number 2 pan head screws with patch lock (M5 x 6)
4 Phillips hex ange head screws (13mm)
4 Phillips Number 2
ACR hex ange head screws
To locate part numbers for the rail kits, open Oracle System Handbook (hps://
support.oracle.com/handbook_priv
ate/index.html) and go to the Oracle FS1
Flash Storage System components list. Part numbers are listed in the components
list.
Related Links
Drive Enclosure Rails
Install Drive Enclosure Rails
Oracle FS1–2 Global Procedures
64
To Next Page
Loading...
Need help?
General