Rohde & Schwarz R&S SMW200A - Page 1178

Remote Control Commands
R&S
®
SMW200A
1178User Manual 1175.6632.02 ─ 30
[:SOURce<hw>]:LIST:DEXChange:AFILe:EXTension <Extension>
Determines the extension of the ASCII file for import or export, or to query existing
files.
Parameters:
<Extension> TXT | CSV
*RST: TXT
Example: See Example "List mode data exchange" on page 1167.
Manual operation: See "ASCII File Settings" on page 522
[:SOURce<hw>]:LIST:DEXChange:AFILe:SELect <Filename>
Selects the ASCII file to be imported or exported.
Parameters:
<Filename> string
Filename or complete file path; file extension can be omitted.
Example: See Example "List mode data exchange" on page 1167.
Manual operation: See "Select (ASCII) Source/Select (ASCII) Destination"
on page 523
[:SOURce<hw>]:LIST:DEXChange:AFILe:SEParator:COLumn <Column>
Selects the separator between the frequency and level column of the ASCII table.
Parameters:
<Column> TABulator | SEMicolon | COMMa | SPACe
*RST: COMMa
Example: See Example "List mode data exchange" on page 1167.
Manual operation: See "ASCII File Settings" on page 522
[:SOURce<hw>]:LIST:DEXChange:AFILe:SEParator:DECimal <Decimal>
Sets "." (decimal point) or "," (comma) as the decimal separator used in the ASCII data
with floating-point numerals.
Parameters:
<Decimal> DOT | COMMa
*RST: DOT
Example: See Example "List mode data exchange" on page 1167.
Manual operation: See "ASCII File Settings" on page 522
SOURce Subsystem