Remote Control Commands
R&S
®
SMW200A
1177User Manual 1175.6632.02 ─ 30
Parameters:
<Filename> string
Filename or complete file path; file extension can be omitted.
Example: See Example "Create an RF list and activate the list mode"
on page 1165.
Manual operation: See "List Mode Data" on page 521
14.19.12.3 List Mode Data Exchange
With the following commands, you can configure lists in ASCII format and export or
import them accordingly.
[:SOURce<hw>]:LIST:DEXChange:AFILe:CATalog?.........................................................1177
[:SOURce<hw>]:LIST:DEXChange:EXECute...................................................................1177
[:SOURce<hw>]:LIST:DEXChange:AFILe:EXTension.......................................................1178
[:SOURce<hw>]:LIST:DEXChange:AFILe:SELect............................................................1178
[:SOURce<hw>]:LIST:DEXChange:AFILe:SEParator:COLumn..........................................1178
[:SOURce<hw>]:LIST:DEXChange:AFILe:SEParator:DECimal..........................................1178
[:SOURce<hw>]:LIST:DEXChange:MODE...................................................................... 1179
[:SOURce<hw>]:LIST:DEXChange:SELect..................................................................... 1179
[:SOURce<hw>]:LIST:DEXChange:AFILe:CATalog?
Queries the available ASCII files for export or import of list mode data in the current or
specified directory.
Return values:
<Catalog> string
List of ASCII files *.txt or *.csv, separated by commas.
Example: See Example "List mode data exchange" on page 1167.
Usage: Query only
Manual operation: See "Select (ASCII) Source/Select (ASCII) Destination"
on page 523
[:SOURce<hw>]:LIST:DEXChange:EXECute
Executes the import or export of the selected list file, according to the previously set
transfer direction with command [:SOURce<hw>]:LIST:DEXChange:MODE
Example:
See Example "List mode data exchange" on page 1167.
Usage: Event
Manual operation: See "Import / Export" on page 523
SOURce Subsystem
To Next Page
Loading...