Maintenance, Storage and Disposal
R&S
®
SMW200A
1275User Manual 1175.6632.02 ─ 30
Reflecting the front panel, the "Check Front Panel" dialog contains all functions to
test the operating elements of the instrument.
In addition, you can check the touch-sensitive functionality by dragging one or
more lines across the screen with your finger.
Calibrate
Executes the touchscreen calibration.
See "Calibrating the touchscreen" on page 1276.
Touchscreen Test
Enables you to perform a touchscreen test. This test checks whether the touchscreen
area has gaps in the response.
See "Testing the touchscreen" on page 1278
17.3.2.2 How to Test the Front Panel
See:
●
"Calibrating the touchscreen" on page 1276
●
"Testing the key panel" on page 1276
●
"Testing the LEDs" on page 1277
●
"Testing the touchscreen" on page 1278
●
"Terminating the test" on page 1279
●
"Debuging" on page 1279
Performing Maintenance Tasks
To Next Page
Loading...