Rohde & Schwarz RTM3K-COM2

Remote control commands
R&S
®
RTM3000
567User Manual 1335.9090.02 ─ 09
Parameters:
<WaveformPosition> Range: -10.0 to 10.0
Increment: 0.1
*RST: -5.0
BPLot:AMPLitude:SCALe
Sets the vertical scale for the amplitude waveform.
Parameters:
<WaveformScale> Range: 0.1 to 2.0
Increment: 0.001
*RST: 1.0
17.8.8.3
Marker table
BPLot:MARKer<m>:DIFFerence:FREQ?.......................................................................... 567
BPLot:MARKer<m>:DIFFerence:GAIN?........................................................................... 567
BPLot:MARKer<m>:DIFFerence:PHASe?........................................................................ 568
BPLot:MARKer<m>:FREQuency..................................................................................... 568
BPLot:MARKer<m>:GAIN?............................................................................................. 568
BPLot:MARKer<m>:INDex..............................................................................................568
BPLot:MARKer<m>:PHASe?.......................................................................................... 568
BPLot:MARKer<m>:SSCReen.........................................................................................569
BPLot:MARKer<m>:DIFFerence:FREQ?
Returns the delta value of the frequency between the two markers.
Suffix:
<m>
.
1..2
The suffix is irrelevant.
Parameters:
<FrequencyDifference>
Usage: Query only
BPLot:MARKer<m>:DIFFerence:GAIN?
Returns the delta value of the gain between the two markers.
Suffix:
<m>
.
1..2
The suffix is irrelevant.
Parameters:
<GainDifference>
Usage: Query only
Applications