Remote control commands
R&S
®
RTM3000
583User Manual 1335.9090.02 ─ 09
Example:
EXP:SCRS:DEST "/USB_FRONT/SCREEN"
Sets the path for saved screenshots to USB flash drive.
MMEMory:NAME <file_name>
Defines the file name to store an image of the display with HCOPy[:IMMediate].
Parameters:
<Filename> String parameter
Example: See Chapter 17.2.1.1, "Saving screenshots to file", on page 424
HCOPy:CWINdow
<CloseWindow>
If ON, open dialog boxes and menus are closed before the screenshot is saved. Thus,
the waveforms and results are always visible on the screenshot.
Parameters:
<CloseWindow> ON | OFF
*RST: ON
HCOPy[:IMMediate]
Saves a screenshot to the specified file.
Before starting, make sure that:
●
The path for storage is defined correctly by MMEMory:CDIRectory
●
The file name for storage is defined by MMEMory:NAME.
Example:
See Chapter 17.2.1.1, "Saving screenshots to file", on page 424
Usage: Event
HCOPy:DATA?
Returns the data of the image file. The file format is defined using HCOPy:LANGuage
(BMP | PNG)
Return values:
<ScreenShot> 488.2 block data
Usage: Query only
HCOPy:FORMat <Format>
HCOPy:LANGuage <Format>
Defines the format of the screenshot.
Documenting results
To Next Page
Loading...
Need help?
General
