Rohde & Schwarz RTM3K-COM2

Remote control commands
R&S
®
RTM3000
725User Manual 1335.9090.02 ─ 09
POWer:HARMonics:MEASurement:FREQuency:PPeak?
Returns the maximum frequency of the measured signal.
Return values:
<MaximumValue>
Usage: Query only
POWer:HARMonics:MEASurement:FREQuency:STDDev?
Returns the standard deviation of frequencies of the measured signal.
Return values:
<DeviationValue>
Usage: Query only
POWer:HARMonics:MEASurement:FREQuency[:ACTual]?
Returns the current frequency value.
Return values:
<ActualValue>
Usage: Query only
POWer:HARMonics:MEASurement:REALpower[:ACTual]?
Returns the measured total power, which is used for dynamic calculation of the limits.
Return values:
<RealPower>
Usage: Query only
POWer:HARMonics:MEASurement:THDistortion:AVG?
Returns the average total harmonic disortion of the measured signal.
Return values:
<AverageValue>
Usage: Query only
POWer:HARMonics:MEASurement:THDistortion:NPEak?
Returns the minimum total harmonic disortion of the measured signal.
Return values:
<MinimumValue>
Usage: Query only
Power analysis (option R&S RTM-K31)