Rohde & Schwarz RTM3K-COM2

Remote control commands
R&S
®
RTM3000
726User Manual 1335.9090.02 ─ 09
POWer:HARMonics:MEASurement:THDistortion:PPeak?
Returns the maximum total harmonic disortion of the measured signal.
Return values:
<MaximumValue>
Usage: Query only
POWer:HARMonics:MEASurement:THDistortion:STDDev?
Returns the standard deviation of total harmonic disortions of the measured signal.
Return values:
<DeviationValue>
Usage: Query only
POWer:HARMonics:MEASurement:THDistortion[:ACTual]?
Returns the current total harmonic disortion value.
Return values:
<ActualValue>
Usage: Query only
POWer:HARMonics:MIFRequency <MILFrequency>
Selects the frequency of the input signal when POWer:HARMonics:STANdard is set
to MIL.
Parameters:
<MILFrequency> F60 | F400
POWer:HARMonics:REPort:ADD
Adds the result to the report list.
Usage:
Event
POWer:HARMonics:RESult<n>:FREQency?
Queries the frequency of the n-th harmonic.
Suffix:
<n>
.
1..40
Return values:
<Frequency>
Usage: Query only
Power analysis (option R&S RTM-K31)