Rohde & Schwarz RTP044 - I;Q Data Output

I/Q software interface (Option R&S RTP-K11)
R&S
®
RTP
1009User Manual 1337.9952.02 ─ 12
- f
c
- f
c
x(t)e
j2
π
f
c
t
Down-conversion, filtering,
and complex conjugation
Input signal: normal
position, lower sideband
●
"Inverse/Upper": Upper sideband in inverse position
f
c
Input signal: inverse
position, upper sideband
f
c
x(t)e
j2
π
f
c
t
-
Down-conversion, filtering,
and complex conjugation
●
"Inverse/Lower": Lower sideband in inverse position
- f
c
- f
c
x(t)e
j2
π
f
c
t
Input signal: inverse
position, lower sideband
Down-conversion and
filtering
Remote command:
CHANnel<m>:IQ:SBIF on page 2253
17.3 I/Q data output
The recorded I/Q data can be saved manually on hard disc or USB flash device for fur-
ther analysis, or extracted using remote control from an external computer. If supported
by the Rohde & Schwarz analysis software, a direct connection and data usage via
LAN is also possible.
Access: "Menu" > "Save/Recall" > "Save" tab > "Waveform"
I/Q data output