Rohde & Schwarz RTP044 - Working with Masks; Setting up User Masks

Mask testing
R&S
®
RTP
440User Manual 1337.9952.02 ─ 12
Segments
Enable the different regions of the mask: "Top", "Bottom", "Left", "Right".
The icons copy the eye shape to the left and to the right.
Remote command:
MTESt:EYEMask:MSKBottom on page 1478
MTESt:EYEMask:MSKTop on page 1478
MTESt:EYEMask:MSKLeft on page 1477
MTESt:EYEMask:MSKRight on page 1477
Convert to user mask
Converts the test and mask definitions of the current mask test to a new mask test of
type "User".
The new test is opened in a separate mask test tab, in the "Define Mask" tab.
This is useful, for example, if want to run variants of a mask test in parallel.
Remote command:
MTESt:CEMask on page 1476
10.4 Working with masks
This chapter explains step-by-step how mask tests are setup and preformed. For the
explanation of the individual settings, see Chapter 10.2, "Mask test settings",
on page 426.
● Setting up user masks...........................................................................................440
● Setting up a mask test...........................................................................................445
● Configuring the mask and hit display.................................................................... 445
● Running a mask test............................................................................................. 446
● Saving and loading masks.................................................................................... 446
● Mask testing on history acquisitions......................................................................447
10.4.1 Setting up user masks
10.4.1.1 Creating user masks
There are two ways to create a new mask:
●
Graphical way by tapping the mask points on the touchscreen,
●
Numerical entry of the x- and y-values of the mask points.
You can combine both methods. For example, at first you enter the mask quickly on the
touchscreen, and then modify the point coordinates with precise values.
To create a mask graphically on the touch screen
1. Tap the "Masks" icon on the toolbar.
Working with masks