Rohde & Schwarz RTP044 - Statistics and Long-Term Measurements

Remote control commands
R&S
®
RTP
1410User Manual 1337.9952.02 ─ 12
22.12.9 Statistics and long-term measurements
See also: Chapter 22.16.8, "Long term measurement results and measurement histo-
gram export to file", on page 1537.
MEASurement<m>:STATistics[:ENABle].........................................................................1410
MEASurement<m>:CLEar.............................................................................................1410
MEASurement<m>:MULTiple.........................................................................................1411
MEASurement<m>:MNOMeas.......................................................................................1411
MEASurement<m>:STATistics:HISTogram...................................................................... 1411
MEASurement<m>:STATistics:HBINs.............................................................................1412
MEASurement<m>:STATistics:MODE............................................................................ 1412
MEASurement<m>:STATistics:RCOunt.......................................................................... 1412
MEASurement<m>:STATistics:RMEascount................................................................... 1413
MEASurement<m>:STATistics:RTIMe............................................................................ 1413
MEASurement<m>:STATistics:RESet.............................................................................1413
MEASurement<m>:VERTical:CONT.............................................................................. 1414
MEASurement<m>:VERTical:AUTO...............................................................................1414
MEASurement<m>:VERTical:OFFSet............................................................................ 1414
MEASurement<m>:VERTical:SCALe............................................................................. 1415
MEASurement<m>:LTMeas[:STATe].............................................................................. 1415
MEASurement<m>:LTMeas:COUNt...............................................................................1415
MEASurement<m>:LTMeas:TIME..................................................................................1416
MEASurement<m>:STATistics[:ENABle] <StatisticsState>
Enables statistics calculation for the measurement.
For details on the statistics results, see Chapter 8.2.11.1, "Statistics", on page 388.
Suffix:
<m>
.
Parameters:
<StatisticsState> ON | OFF
*RST: OFF
Usage: Asynchronous command
MEASurement<m>:CLEar
Deletes the statistic results of the indicated mesurement.
Suffix:
<m>
.
1..10
See "Selection of the measurement group: MEASurement<m>"
on page 1359.
Usage: Event
Asynchronous command
Automatic measurements