Rohde & Schwarz RTP044 - USB (Option R&S RTP-K60)

Remote control commands
R&S
®
RTP
2005User Manual 1337.9952.02 ─ 12
22.17.19 USB (option R&S RTP-K60)
● Configuration.......................................................................................................2005
● Trigger.................................................................................................................2007
● Decode results.................................................................................................... 2018
● Search settings................................................................................................... 2024
● Search results..................................................................................................... 2039
22.17.19.1 Configuration
In all BUS<m>:USB commands, the suffix <m> selects the serial bus.
BUS<m>:USB:TECHnology.......................................................................................... 2005
BUS<m>:USB:DPLus:SOURce..................................................................................... 2005
BUS<m>:USB:DMINus:SOURce................................................................................... 2006
BUS<m>:USB:DIFFerential:SOURce............................................................................. 2006
BUS<m>:USB:DPLus:THReshold..................................................................................2006
BUS<m>:USB:DMINus:THReshold................................................................................2006
BUS<m>:USB:DIFFerential:THReshold..........................................................................2007
BUS<m>:USB:TECHnology <ProtocolType>
Defines the USB protocol technology and transmission speed.
Suffix:
<m>
.
1..4
Parameters:
<ProtocolType> LOW | FULL | HIGH
LOW
USB low speed protocol (1.5 Mbit/s)
FULL
USB full speed protocol (12 Mbit/s)
HIGH
USB high speed protocol (480 Mbit/s)
*RST: LOW
BUS<m>:USB:DPLus:SOURce <SourceDplus>
Selects the source for the D+ data signal (in USB low speed and USB full speed proto-
col, only).
Suffix:
<m>
.
1..4
Parameters:
<SourceDplus> C1W1 | C2W1 | C3W1 | C4W1 | M1 | M2 | M3 | M4 | M5 | M6 |
M7 | M8 | R1 | R2 | R3 | R4
*RST: C1W1
Usage: Asynchronous command
Protocols