Rohde & Schwarz RTP044 - Reference Waveforms

Remote control commands
R&S
®
RTP
1327User Manual 1337.9952.02 ─ 12
Setting parameters:
<DiagramName> Name of the diagram on which the zoom area is based.
<ZoomName> Name of the zoom diagram
Example: See Chapter 22.3.1.2, "Creating zoom diagrams", on page 1127
Usage: Setting only
Asynchronous command
22.10.2 Reference waveforms
● Reference............................................................................................................1327
● Scaling................................................................................................................ 1329
● Waveform data export.........................................................................................1334
● Import of multichannel waveform data................................................................ 1335
22.10.2.1 Reference
REFCurve<m>:SOURce...............................................................................................1327
REFCurve<m>:STATe...................................................................................................1328
REFCurve<m>:NAME.................................................................................................. 1328
REFCurve<m>:OPEN...................................................................................................1328
REFCurve<m>:UPDate................................................................................................ 1328
REFCurve<m>:SAVE................................................................................................... 1329
REFCurve<m>:DELete.................................................................................................1329
REFCurve<m>:CLEar...................................................................................................1329
REFCurve<m>:SOURce <Source>
Selects the source waveform to be used as a reference.
Suffix:
<m>
.
1..4
Reference waveform
Parameters:
<Source> C1W1 | C1W2 | C1W3 | C2W1 | C2W2 | C2W3 | C3W1 | C3W2 |
C3W3 | C4W1 | C4W2 | C4W3 | M1 | M2 | M3 | M4 | R1 | R2 |
R3 | R4 | TRK1 | TRK2 | TRK3 | TRK4 | TRK5 | TRK6 | TRK7 |
TRK8 | Z1V1 | Z1V2 | Z1V3 | Z1V4 | Z1I1 | Z1I2 | Z1I3 | Z1I4 |
Z2V1 | Z2V2 | Z2V3 | Z2V4 | Z2I1 | Z2I2 | Z2I3 | Z2I4 | DIFF1 |
DIFF2 | COMMON1 | COMMON2
Source of the reference waveform, see Chapter 22.4.2, "Wave-
form parameter", on page 1145
*RST: C1W1
Usage: Asynchronous command
Waveform analysis