Rohde & Schwarz RTP044 - External Application

Instrument setup
R&S
®
RTP
130User Manual 1337.9952.02 ─ 12
Remote command:
EXPort:RESult:DELimiter on page 1546
4.8.3 External application
The R&S RTP can start an external application on the instrument or in the network (if
connected) when an event occurs.
The following events can start an application:
●
Trigger event
●
Mask violation
●
Successful completion of mask test
●
Limit or margin violation of measurements
●
Successful completion of limit and margin tests
Set the path of the application executable, optional parameters, and the working direc-
tory as in a Windows shortcut definition. The setup is valid for all events.
Remote commands:
●
EXECutable:NAME on page 1546
●
EXECutable:PARameter on page 1546
●
EXECutable:WDIRectory on page 1547
Save / recall