Rohde & Schwarz RTP044 - Horizontal; Setup Settings

Acquisition and waveform setup
R&S
®
RTP
141User Manual 1337.9952.02 ─ 12
GainCommonMode
alGainDifferenti
CMRR 
In addition, the R&S ProbeMeter of R&S RT-ZD differential probes can measure differ-
ential and common mode DC voltages. The measurement result is displayed on the
oscilloscope's screen. The common mode measurement of the R&S ProbeMeter
allows you to check the input voltage relative to ground. Thus, the CM measurement is
a convenient way to detect breaches of the operating voltage window, and the reason
of unwanted clippings.
5.2 Horizontal
The "Horizontal" dialog provides the time base configuration for channel and spectrum
waveforms.
5.2.1 Setup settings
Access: "Menu" > "Horizontal" > "Setup" tab.
Horizontal