Data and file management
R&S
®
RTP
497User Manual 1337.9952.02 ─ 12
Export results
Enter the filename to save the results to. Double-tap the filename to open the file
selection dialog box.
By default, the filename has the prefix "ResultBoxExport_".
You can define a pattern for automatic naming in the "Menu" > "Settings" > "Save/
Recall" > "Autonaming".
"Save"
Saves the selected results to the indicated file.
"Save As..."
Opens the file selection dialog box and saves the selected results to
the selected file. See also Chapter 12.5, "File selection dialog",
on page 509
".csv/.html"
Selects the file format.
●
CSV: the values are saved in a file
You can select the value delimiter and the list separator symbol in
the "CSV Export" dialog, see Chapter 4.8.2, "CSV export",
on page 129.
Tip for using MS Excel: It is recommended that you use the semi-
colon as csv decimal symbol. When you open the file with MS
Excel, use "File > Open" and follow the wizard to set the separa-
tors correctly, or set the separator settings with "Tools > Options >
International".
●
HTML: Results are saved as web page for display in a browser.
Remote command:
EXPort:RESult:NAME on page 1537
EXPort:RESult:SAVE on page 1537
12.2.5 Result plots analysis
Access: "Menu" key >"Save/Recall" key > "Save" tab > "Result Plots"
You can export the data of long-term measurements, the measurement histogram and
track data to file.
The measurement export saves results in two files. The *.Wfm.* file contains data
values, and the other file is the header file.
The header file contains:
●
Source waveform of the measurement
●
Measurement scale
●
Export type = Histogram, Long term or Track
●
Exported measurement
●
Histogram range: XStart, XStop, YStart, YStop
The range is only relevant for export type = histogram. The measurement axis is
the X-axis, which can be a horizontal or vertical axis depending on the histogram
mode.
Save and recall waveform data and results
To Next Page
Loading...
