Rohde & Schwarz RTP044 - SPI (Option R&S RTP-K1)

Remote control commands
R&S
®
RTP
1586User Manual 1337.9952.02 ─ 12
Return values:
<Value> Range: 0 to 255
Increment: 1
*RST: 0
Usage: Query only
22.17.4 SPI (option R&S RTP-K1)
● SPI bus configuration..........................................................................................1586
● SPI trigger........................................................................................................... 1590
● SPI decode results..............................................................................................1593
● SPI search settings............................................................................................. 1598
● SPI search results...............................................................................................1601
22.17.4.1 SPI bus configuration
BUS<m>:SPI:BORDer..................................................................................................1586
BUS<m>:SPI:WSIZe.................................................................................................... 1587
BUS<m>:SPI:SCLK:SOURce........................................................................................1587
BUS<m>:SPI:SSELect:SOURce....................................................................................1587
BUS<m>:SPI:SSELect:POLarity....................................................................................1588
BUS<m>:SPI:MISO:SOURce........................................................................................ 1588
BUS<m>:SPI:MISO:POLarity........................................................................................ 1588
BUS<m>:SPI:MOSI:SOURce........................................................................................ 1589
BUS<m>:SPI:MOSI:POLarity........................................................................................ 1589
BUS<m>:SPI:SCLK:THReshold.....................................................................................1589
BUS<m>:SPI:MISO:THReshold.....................................................................................1589
BUS<m>:SPI:MOSI:THReshold.....................................................................................1589
BUS<m>:SPI:SSELect:THReshold................................................................................ 1589
BUS<m>:SPI:FRCondition............................................................................................ 1590
BUS<m>:SPI:TIMeout.................................................................................................. 1590
BUS<m>:SPI:BORDer <BitOrder>
Defines if the data of the messages starts with msb (most significant bit) or lsb (least
significant bit).
Suffix:
<m>
.
1..4
Selects the serial bus.
Parameters:
<BitOrder> LSBF | MSBF
*RST: MSBF
Usage: Asynchronous command
Protocols