Getting started
R&S
®
RTP
61User Manual 1337.9952.02 ─ 12
Checkmark [☑]
The checkmark key [☑] has different functions depending on the focus:
●
In usual dialog box: if the focus is on a selection list, the key opens the list and
applies the selected value.
●
In tables: activates the edit mode.
Tab
The tab key has various functions:
●
In dialog boxes with only horizontal tabs, the key switches the horizontal tabs.
●
In dialog boxes with horizontal and vertical tabs, the key switches the tabthat has
the focus.
●
In a table or diagram, the key moves the focus in the same way as the [▶] key.
Up arrow [▲], Down arrow [▼]
The up and down arrow keys have the following effects:
●
In numeric edit fields: increase or decrease the parameter value.
●
In tables: scroll vertically through the rows.
●
In dialog boxes, for option buttons in a column: select an option. In an open selec-
tion list, the keys scroll the list.
Left arrow [◀], Right arrow [▶]
The left and right arrow keys have the following effects:
●
In edit fields: move the cursor.
●
In tables: scroll horizontally through the columns.
●
In dialog boxes, for option buttons in a row: select an option.
3.3 Operating the instrument
There are three ways to operate the R&S RTP.
Manual operation
Use the touchscreen, keys and rotary knobs, or an optional mouse and/or keyboard.
The principles of manual operation are explained in this section.
Remote control
Create programs to automatize repeating settings, tests, and measurements. The
instrument is connected to a computer that runs the program.
This way of operation is described in: Chapter 22, "Remote control commands",
on page 1119
Remote operation
The remote desktop connection of Windows can be used for instrument control and file
transfer. Even on computers with non-Windows operating systems, a remote desktop
connection is possible using RDP applications.
For details, refer to the user manual, chapter "Remote Desktop Connection".
Operating the instrument
To Next Page
Loading...
