Rohde & Schwarz RTP044 - RFFE (Option R&S RTP-K40)

Remote control commands
R&S
®
RTP
1811User Manual 1337.9952.02 ─ 12
Suffix:
<m>
.
*
Selects the frame.
<n> *
Selects the word.
Query parameters:
<SearchName>
Return values:
<WordValue> Range: 0 to 65535
Increment: 1
*RST: 0
Usage: Query only
SEARch:RESult:TBTO:FRAMe<m>:WORD<n>:VSTR? <SearchName>
Returns the string equivalent of data value for the selected cell.
Suffix:
<m>
.
*
<n> *
Query parameters:
<SearchName>
Return values:
<WordValueString>
Usage: Query only
22.17.13 RFFE (option R&S RTP-K40)
For programming examples, see Chapter 22.3.6.1, "RFFE (option R&S RTP-K40)",
on page 1139.
22.17.13.1 Configuration
In all BUS<m>:RFFE commands, the suffix <m> selects the serial bus.
For programming examples, see "Configuring RFFE bus" on page 1139.
BUS<m>:RFFE:CLOCk:SOURce...................................................................................1812
BUS<m>:RFFE:DATA:SOURce..................................................................................... 1812
BUS<m>:RFFE:PRESet............................................................................................... 1812
BUS<m>:RFFE:COUPling............................................................................................ 1813
BUS<m>:RFFE:DATA:THReshold:HIGH.........................................................................1813
BUS<m>:RFFE:DATA:THReshold:LOW......................................................................... 1813
BUS<m>:RFFE:DATA:THReshold:HYSTeresis................................................................1813
BUS<m>:RFFE:CLOCk:THReshold:HIGH...................................................................... 1814
Protocols