Rohde & Schwarz RTP044 - Differential Signals

Remote control commands
R&S
®
RTP
1243User Manual 1337.9952.02 ─ 12
Suffix:
<m>
.
1..2
<n> 1..4
Return values:
<Data> Liste of values according to the format setting.
Example:
FORMat:DATA ASCii
ZVC:Z2:V2:DATA:HEADer?
<-- -0.0001,0.0001,1000,1
ZVC:Z2:V2:DATA:VaLues?
<-- 0.00083049136446789,-0.0042279558256269,-0.0076707201078534,
-0.011294682510197,-0.015915233641863,-0.018905002623796,
-0.022423267364502, ….
1000 values are returned.
Usage: Query only
22.8.9
Differential signals
Some of the commands in the following chapter are asynchronous. An overlapping or
asynchronous command does not automatically finish executing before the next com-
mand starts executing. If overlapping commands must be executed in a defined order,
e.g. to avoid wrong measurement results, they must be serviced sequentially.
To prevent an overlapping execution of commands, one of the commands *OPC,
*OPC? or *WAI can be used after the command or a command set.
For more information, see:
●
www.rohde-schwarz.com/rc-via-scpi, chapter "Command Sequence and Synchro-
nization"
●
Chapter 22.3, "Programming examples", on page 1126
DIFFerential<m>:STATe................................................................................................1244
DIFFerential<m>:PSIGnal[:SELect]................................................................................1244
DIFFerential<m>:NSIGnal[:SELect]................................................................................1244
DIFFerential<m>:AOUTput............................................................................................1244
DIFFerential<m>:BOUTput............................................................................................1244
DIFFerential<m>:COMMon:STATe.................................................................................1245
DIFFerential<m>:DIFFerential:STATe............................................................................. 1245
DIFFerential<m>:NSIGnal:STATe...................................................................................1245
DIFFerential<m>:PSIGnal:STATe...................................................................................1245
DIFFerential<m>:COMMon:SCALe................................................................................1245
DIFFerential<m>:DIFFerential:SCALe............................................................................ 1245
DIFFerential<m>:COUPling...........................................................................................1245
DIFFerential<m>:COMMon:OFFSet...............................................................................1246
DIFFerential<m>:DIFFerential:OFFSet...........................................................................1246
DIFFerential<m>:COMMon:POSition..............................................................................1246
DIFFerential<m>:DIFFerential:POSition..........................................................................1246
Acquisition and setup