Remote control commands
R&S
®
RTP
1336User Manual 1337.9952.02 ─ 12
Suffix:
<m>
.
1..4
Selects the reference waveform.
Parameters:
<MltChImptWfmSel> NONE | NONE | WF1 | WAVeform1 | WF2 | WAVeform2 | WF3 |
WAVeform3 | WF4 | WAVeform4
WF1 = WAVeform1, WF2 = WAVeform2, WF3 = WAVeform3,
WF4 = WAVeform4
Selects the waveform in the export file.
*RST: NONE
Example: Prerequisite: file RefCurve_2016-02-16_01.bin is a multi-
channel export with at least WF1, WF3 and WF4.
REFCurve:MULTichannel:NAME 'RefCurve_2016-02-16_01.bin'
REFCurve1:MULTichannel:IMPort WF1
REFCurve2:MULTichannel:IMPort WF3
REFCurve3:MULTichannel:IMPort WF4
REFCurve:MULTichannel:OPEN
Usage: Asynchronous command
Firmware/software: FW 3.20
REFCurve<m>:MULTichannel:OPEN
Loads the waveform data to the reference waveforms.
Suffix:
<m>
.
1..4
The suffix is irrelevant.
Example: See REFCurve<m>:MULTichannel:IMPort on page 1335.
Usage: Event
Asynchronous command
22.10.3 Mathematics
CALCulate:MATH<m>[:EXPRession][:DEFine]................................................................1337
CALCulate:MATH<m>:STATe........................................................................................ 1337
CALCulate:MATH<m>:ENVSelection............................................................................. 1337
CALCulate:MATH<m>:ARIThmetics...............................................................................1338
CALCulate:MATH<m>:VERTical:OFFSet........................................................................1338
CALCulate:MATH<m>:VERTical:RANGe........................................................................1339
CALCulate:MATH<m>:VERTical:SCALe.........................................................................1339
CALCulate:MATH<m>:VERTical:MAXimum.................................................................... 1339
CALCulate:MATH<m>:DATA:STYPe?............................................................................ 1340
CALCulate:MATH<m>:DATA:HEADer?...........................................................................1340
CALCulate:MATH<m>:DATA[:VALues]?..........................................................................1341
Waveform analysis