Rohde & Schwarz RTP044 - Mathematics; Search

Mixed signal option (MSO, R&S RTP-B1)
R&S
®
RTP
952User Manual 1337.9952.02 ─ 12
See also:
●
Chapter 12.2.6, "Saving and loading waveform data", on page 500
●
Chapter 12.2.1, "Waveform export files", on page 481
Remote commands for export to file:
●
EXPort:WAVeform:SOURce on page 1527
●
EXPort:WAVeform:NAME on page 1530
●
EXPort:WAVeform:SAVE on page 1530
Remote commands for remote data transfer:
●
BUS<m>:PARallel:DATA:FORMat on page 2204
●
BUS<m>:PARallel:DATA:HEADer? on page 2219
●
BUS<m>:PARallel:DATA[:VALues]? on page 2219
●
DIGital<m>:DATA:HEADer? on page 2218
●
DIGital<m>:DATA[:VALues]? on page 2218
14.6 Mathematics
A parallel bus that is displayed as quasi-analog waveform can be analyzed with FFT.
To configure the FFT, use the "Advanced" mode and the formula editor.
14.7 Search
Access: "Menu" > "Apps" > "Analysis" tab > "Search".
It is also possible to search on digital channels for specified events. Search conditions
use the same parameters as the trigger event definition, see Chapter 14.3.1, "Trigger
settings for digital signals and parallel buses", on page 938.
Search